Autel Alpha - 3.7.2 Camera Operations

48 Chapter 3 Aircraft
3
Infrared Thermal
Imaging Camera
(45mm Focal
Length)
The infrared thermal imaging camera is used for radiometric
measurement and night vision, which can monitor the
temperature distribution of the measured target in real time, so
as to judge the state of the target.
Measuring range: 35 meters. Resolution: 640*512
Radiometric temperature range: -20℃ ~ +150℃ (high gain
mode) and 0
℃
~ + 550
℃
(low gain mode).
4
Wide Angle
Camera
The wide angle camera is used to capture images with a larger
field of view within a shorter shooting distance.
1/2" CMOS, 48 million effective pixels, and supports 8k photos.
5
Infrared Thermal
Imaging Camera
(13mm Focal
Length )
The infrared thermal imaging camera is used for radiometric
measurement and night vision, which can monitor the
temperature distribution of the measured target in real time, so
as to judge the state of the target.
Measuring range: 5 meters. Resolution: 640*512
Radiometric temperature range: -20℃ ~ +150℃ (high gain
mode) and 0
℃
~ + 550
℃
(low gain mode).
Warning

Do not point the infrared thermal imaging camera at intensive energy sources such as the
sun, lava, laser beams, and molten iron, to avoid damage to the infrared detector.
 The temperature of the observation target should be less than 600 ℃. Observing objects
with temperatures above this limit may result in damage to the infrared detector.

The laser rangefinder is a Class 1 laser product that emits laser radiation. Avoid direct
exposure to the eyes when in use.
Camera Operations
 Remote Controller Control
 Right dial wheel: Used to adjust the zoom factor of the selected camera. Turn left to reduce
the zoom factor, and turn right to increase the zoom factor.
 Video recording button: Press the button to start/end video recording.
 Shooting button: Press the button to take photos.
Tip

For the control operations of the remote controller, see “4.1.1 Remote Controller
Components” in Chapter 4.
 Autel Enterprise App Control
For the control operations and the functions related to the camera in the Autel Enterprise App,
see “6.8 Camera Interfaces” in Chapter 6.