115
2. Hook – unclogs obstacles and picks up wires in the pipes or confined
areas.
3. Mirror – helps to look around corners and see the unreachable areas.
Figure 16-3 5.5mm Imager Head Accessories
1. Mirror – helps to look around corners and see the unreachable areas.
2. Magnet – picks up small metal objects, such as dropped rings or screws.
Accessory Assembly
For 8.5mm Imager Head
The three accessories, including the Magnet, Hook, and Mirror, can be
attached to the Imager Head with the same manner described below:
1. Hold the accessory and the imager head.
2. Slip the end of the accessory over the imager head and then fix the
accessory.
For 5.5mm Imager Head
The two accessories, including the Magnet and Mirror, can be attached to the
Imager Head with the same manner described below:
To Next Page
Loading...
