67
Seat learning
Driver seat position memory function and key learning: After the vehicle stops,
the power seat returns to the rearmost end. The driver unlocks the vehicle with
the key or the Passive Entry Passive Start (PEPS) system. When the driver
door is open, the driver seat and the exterior rearview mirror move to the set
position automatically. After the seat module is replaced, learn each of the
limit positions (front, rear, top and bottom).
Language change
The language displayed on the LCD screen of the vehicle central console can
be changed according to the user demand.
Headlamp learning
After the headlamp module is replaced, learn each of the limit positions (top,
bottom, left and right). Detect the ambient light and decide whether to open
the headlamp automatically; monitor the driving speed of the vehicle, the
vehicle attitude, etc. to timely adjust the lighting angle of the headlamp.
Tire retrofitting
After the tire is replaced, write the data of the new tire size into the ECU.
TEC learning
Perform the adaptation learning of the Crankshaft Position (CKP) sensor. The
CKP sensor learns the processing tolerance of the crankshaft teeth and save
it to the ECU, to diagnose the engine misfire more accurately.
Transmission learning
The disassembly or repair of the transmission (or the battery disconnection for
some model series) can lead to gear shift delay or impact issue. At this time,
it is necessary to learn the transmission to make it automatically perform the
compensation according to the driving conditions, and reach a more
comfortable, ideal quality of gear shift.
To Next Page
Loading...
