23
Hot Function
This option is a separate section designed to perform vehicle scheduled
service and maintenance, such as to reset the service lights and perform
calibration for various systems.
Pre-scan Report
Via entering the repair order number, record and generate the trouble code
and a diagnostic report of whether you need to calibrate the ADAS system or
not.
Post-scan Report
Via entering the repair order number, record and generate the trouble code
and a diagnostic report of whether the calibration is successful or not.
Vehicle Profile
This section describes basic information of the vehicle including vehicle type,
vehicle year, model type, and vehicle engine, etc.
Diagnosis
There are two options available when accessing the Diagnosis section:
1. Auto Scan – starts auto scanning for all the available systems on the
vehicle.
2. Control Units – displays a selection menu of all available control units of
the test vehicle.
Auto Scan
The Auto Scan function performs a comprehensive scanning over all the
systems on the vehicle’s ECU in order to locate fault systems and retrieve
DTCs. The sample operation interface of Auto Scan displays as below:
To Next Page
Loading...
