Autel MaxiSys ADAS - Page 125

118
5. Focus the image to be captured in the view finder by adjusting and
properly locating the imager head cable.
6. Tap the blue ring on the operating screen. The view finder now displays
the captured picture and auto-saves the taken photo.
7. Tap the thumbnail image on the top right corner of the screen to view the
stored image, slide the screen left and right to view the images one by
one.
8. Tap on the selected image and the edit toolbar instantly displays.
9. Tap the appropriate button to share, delete, or edit the image.
10. Tap the Back or Home button on the Navigation bar at the bottom of the
screen to exit the Digital Inspection application.
 To record a video using the Digital Inspection application
1. Connect the Imager Head Cable to the USB port on the top side of the
tablet.
2. If not already done, power up the tablet.
3. Tap the Digital Inspection application on the MaxiSys Job Menu. The
Digital Inspection application interface displays, showing a camera
operating screen. The default camera is now the Imager head.
4. Select the video icon at the lower right corner to record a video.
5. Properly locate the imager head cable to focus the inspection scene for
recording.
6. Tap the red ring on the operating screen to start recording.
7. Tap the red circle again to stop recording. The recorded video is
automatically saved to the system Gallery.
8. Tap the thumbnail image on the top right corner to review the recorded
video.
9. Tap the Play button to play the video.
10. Tap on the selected video and the edit toolbar instantly displays.
11. Tap the appropriate button to share, delete, or edit the video.
12. Tap the Back or Home button on the Navigation bar at the bottom of the
screen to exit the Digital Inspection application.
 To configure various settings for the work mode of the imager head
1. Tap button at the bottom edge of the circle.
2. Select each item to make appropriate adjustments.
For more tips and detailed information about the camera application, please
refer to associated Android documentations.