80
2. Status Bar
Left Side – displays the MaxiSys device model information and serial
number.
Right Side – displays an update progress bar indicating the completion
status.
3. Main Section
Left Column – displays vehicle logos and update firmware version
information.
Middle Column – displays a brief introduction about the new changes to
the firmware operation or capabilities. Tap button to display an
information screen to view more details, and tap the dim area around to
close the window.
Right Column – according to the operation status of each firmware item,
the button displays differently.
a) Tap Update to update the selected item.
b) Tap Pause to suspend the updating procedure.
c) Tap Continue to go on updating the suspended update.
To update the firmware
1. Power up the tablet, and ensure that it is connected to a power source
and has a steady internet connection.
2. Tap the Update application button from the MaxiSys Job Menu; or tap
the update notification message when received. The Update application
screen displays.
3. Check all available updates:
If you decide to update all the items, tap the Update All button.
If you only want to update some individual items, tap the Update button
on the right column of the specific item.
4. Tap the Pause button to suspend the updating process. Tap Continue to
resume the update and the process will continue from the pause point.
5. When the updating process is completed, the firmware will be installed
automatically. The new version will replace the order version.
To Next Page
Loading...
