AUTOFRY FFG-10 - Install Oil Pot; Install Heater Box Assembly

AUTOFRY Models FFG-10 and MTI-10 Operator's Manual
Install oil pot.
• Place the oil pot into the cooking chamber and install the oil pot bracket onto
the oil pot flange mounted on the floor of the cooking chamber. Ensure that
the drain valve is in the closed position (see Figure 6).
Experience has shown that an even light application of Kote® bran soil shield
on the exterior surfaces of the oil pot will prove helpful when it is time to clean
the oil pot. To order call 800-348-2976.
Install the heater box assembly.
MTI FormOP-0010 Rev. 005 5/98
E167654
6