AUTOFRY FFG-10 - Questions and Answers

AUTOFRY Models FFG-10 and MTI-10 Operator's Manual
Questions and Answers
Q:
Can
1
cook more than french fries in my
AUTOFRY
?
A:
Yes. The
AUTOFRY
can
prepare a wide variety of products. However,
for best results we recommend pre
-
cooked froz
en products.
Q:
How often should
1
change my oil?
A:
That depends on what and how much product you are cooking. Generally
your oil should be changed at least once a week or as often as you deem
necessary to keep your food tast
ing fresh. The use of shortening test
strips will prove useful to determine the oil condition.
Q:
1
hear a "thump" just before and just after the food exits the
AUTOFRY
.
Is
there something wrong?
A:
Nothing is wrong with the
A
UTOFRY
.
The sound you are hearing is the
wire food basket contacting the cabinet to ensure full delivery of the
entered food.
Q:
I've entered an order of food and nothing came out?
A:
Here are two of the most common reasons:
1.
The food was entered before the previous cook cycle was completed.
Remember to wait for the
O
READY
light to illuminate before entering
the next order.
2.
The wire food basket was not installed or not correctly installe
d.
Q:
I've just cleaned my
AUTOFRY
this
morning and when I turned it on
nothing happened or the display reads
Sft
or
A03
.
A:
Did you remember to re
-
install all three filters and the filter cover plate?
The
AUTOFRY
is equipped
with a safety interlock system that will not
allow you to operate it with even one of the three filters not installed.
Check that they are all installed, that the main door is closed and locked
and that there is nothing blocking the air vent
at the top of the
AUTOFRY
.
Q:
I've just cleaned my AUTOFRY and the display reads
417
or
Prb
or
A02
,
the
0
WAIT
light is blinking and the fan won't shut off. What is wrong?
A:
The temperature sensing plug is not connected to the he
ater box. Ensure
that both plugs are clean and firmly seated into their sockets at the
bottom of the heater box.
MTI FormOP-0010 Rev. 005 5/98
E167654
26