AUTOFRY Models FFG-10 and MTI-10 Operator's Manual
Questions and Answers (cont.)
Q:
My customers are complaining of odor. What's wrong?
A:
Nothing is wrong with the AUTOFRY. It is simply time to change or add
oil or the charcoal filter is
in need of a change. Occasionally food product
will miss the food basket during entry and end up in the oil pot. If this
does happen it will over-cook and cause excess odor and erratic
temperature readings.
Q:
I am in the middle of my lunchtime rush, the display reads A05 and there
is a "beeping" coming from the
button. If the display does not clear un
to silence the "beeping" and clear the displa
AUTOFRY and press the ON button. The A05 is an error message that
simply means the oil temperature has not recovered to 350° F in 16
minutes. Please keep in mind that the AUTOFRY needs some time
the oil. Please wait until the oil temperature is
at or above 345° F prior to entering food. Alternatively you could prepare
product in advance of your rush period.
is just too small for your operation if this is th
MTI-40 Double Basket AUTOFRY.
An A05 could also be the result of a heater plug that is not connected
loosely connected or grease laden.
il on the inside floor of the
is leaking?
A:
Though not impossible it is unlikely that the oil pot is leaking. Check the
• Does your frozen product contain a lot of ice? Excessive ice will cause
• Does your frozen product contain a high level of water?
• Are you over filling the food entry chute?
cond order before the first order has dispensed?
• Although the AUTOFRY is fully enclosed it is a deep fryer and
splashing of oil is a normal condition.
MTI FormOP-0010 Rev. 005 5/98
E167654
To Next Page
Loading...