AUTOFRY Models FFG-10 and MTI-10 Operator's Manual
Programming Cook Times
The AUTOFRY equipped with a thermocouple offers you the ability to program the
1-6 keys for your most common cook times. It is a good idea to write down your six
most commonly used cook times prior to programming the AUTOFRY. Instructions
for programming are as follows,
Entering the programming mode.
1. Press the OFF Button.
2. Simultaneously press the 2 and 0 buttons.
• The display will read P =
3. Press 2 then 2 then 2 then START.
• The display will read 001.
Key # 1
1. Press the 1 key to view or edit the pre-set cook time.
• The display will read 1:00.
2. Press the 2 key to increase the cook time or press the 3 key to decrease the
cook time.
3. Press the 1 key to save the changes.
• The display will return to 001.
If you do not wish to continue re-programming the other 5 buttons simply press the
OFF button. Otherwise, with the display reading 001 follow these instructions:
Key # 2
1. Press the 2 button.
• The display will read 002.
2. Press the 1 button to view or edit the pre-set cook time.
• The display will read 2:00.
3. Press the 2 key to increase the cook time or press the 3 key to decrease the
cook time.
4. Press the 1 button to save the changes.
• The display will return to 002.
If you do not wish to continue re-programming the other 4 buttons simply press the
OFF button. Otherwise, with the display reading 002 follow these instructions:
MTIFormOP-0010 Rev. 005 5/98
E167654
To Next Page