AUTOFRY FFG-10 - Page 22

AUTOFRY Models FFG-10 and MTI-10 Operator's Manual
Programming Cook Times (cont.)
1. Press the 2 button.
• The display will read 003.
2. Press the 1 button to view or edit the pre-set cook time.
• The display will read 3:00.
3. Press the 2 key to increase the cook time or press the 3 key to decrease the cook
time.
4. Press the 1 button to save the changes.
• The display will read 003.
If you do not wish to continue re-programming the other 3 buttons simply press the OFF
button. Otherwise, with the display reading 003 follow these instructions:
1. Press the 2 button.
• The display will read 004.
2. Press the 1 button to view or edit the pre-set cook time.
• The display will read 4:00.
3. Press the 2 key to increase the cook time or press the 3 key to decrease the cook
time.
4. Press the 1 button to save the changes.
• The display will read 004.
If you do not wish to continue re-programming the other 2 buttons simply press the OFF
button. Otherwise, with the display reading 004 follow these instructions:
1. Press the 2 button.
• The display will read 005.
2. Press the 1 button to view or edit the pre-set cook time.
• The display will read 5:00.
3. Press the 2 key to increase the cook time or press the 3 key to decrease the cook
time.
4. Press the 1 button to save the changes.
• The display will read 005.
If you do not wish to continue re-programming the last button simply press the OFF
button. Otherwise, with the display reading 005 follow these instructions:
MTI FormOP-0010 Rev. 005 5/98 17
E167654