AUTOFRY Models FFG-10 and MTI-10 Operator's Manual
Programming Cook Times (cont)
1. Press the 2 button.
• The display will read 006.
2. Press the 1 button to view or edit the pre-set cook time.
• The display will read 6:00.
3. Press the 2 key to increase the cook time or press the 3 key to decrease the
cook time.
4. Press the 1 button to save the changes.
• The display will read 006.
Exit programming mode
To exit the programming mode press the OFF key. You have now pre-
programmed your AUTOFRY for optimum convenience.
Using the pre-programmed times
To use the pre-programmed keys simply press the 1-6 key. The display will show
001-006. Place the selected food into the food entry chute, close the entry chute
door and press the START key. The display will count down the pre-programmed
time.
MTIFormOP-0010 Rev. 005 5/98
E167654
To Next Page
Loading...