AUTOFRY Models FFG-10 and MTI-10 Operator's Manual
Daily Cleaning (cont.)
Use extreme caution when cleaning around the fire system actuation cables and
fusible link in the interior cabinet. Accidental discharge of the fire system could
result, (see Figures 12A & 128).
Clean all interior surfaces to bare metal.
Sanitize all part and interior surfaces in a quaternary ammonia or iodine
solution at a room temperature of at least 75° F following the manufacturer's
label instructions.
Polish the exterior surfaces using a commercial grade stainless steel
polish and a soft cloth.
Replace all the clean dry components and add oil or shortening as
needed.
MTIFormOP-0010 Rev. 005 5/98
E167654
To Next Page
Loading...