p 16/58
Technical Manual NAM-BL4x-MT-EN-C
The information in this document is the property of Automatic Systems and is confidential. The consignee withholds from using it for anything other than the use of the products or the execution of the
project to which they belong and withholds from communicating it to third parties without prior written agreement from Automatic Systems. Document subject to change without prior notice.
Reset Counters
Counters reset to zero following the download of a
different program version of level 3 (see Download Chg
Lv3).
Curve 229Std
Change in the type of barrier: selection of curve 229
standard (Barrier Type parameter under the QUICK
START menu).
Curve 229Highway
Change in the type of barrier: selection of curve 229
highway (Barrier Type parameter under the QUICK
START menu).
Curve 1x-2x-3x-5x
Change in the type of barrier: selection of curve for BL16,
BL32, BL33, BL52, BL53 (Barrier Type parameter under
the QUICK START menu).
Curve BLG77
Change in the type of barrier: Selection of curve BLG77
(Barrier Type parameter under the QUICK START menu).
Curve Special
Change in the type of barrier: selection of the Special
curve (OPTIONS menu) for operation according to the OP
REGULATION and CL REGULATION menus.
Curve BL223
Change in the type of barrier: Selection of curve BL223
(Barrier Type parameter under the QUICK START menu).
Curve BL40 AVR
Change in the type of barrier: Selection of curve BL40
AVR (Barrier Type parameter under the QUICK START
menu).
Curve BL40 SR
Change in the type of barrier: Selection of curve BL40SR
(Barrier Type parameter under the QUICK START menu).
Curve BL41 AVR
Change in the type of barrier: Selection of curve BL41AVR
(Barrier Type parameter under the QUICK START menu).
Curve BL41 SR
Change in the type of barrier: Selection of curve BL41SR
(Barrier Type parameter under the QUICK START menu).
Curve BL43 AVR
Change in the type of barrier: Selection of curve BL43AVR
(Barrier Type parameter under the QUICK START menu).
Curve BL43 SR
Change in the type of barrier: Selection of curve BL43SR
(Barrier Type parameter under the QUICK START menu).
Curve BL44 AVR
Change in the type of barrier: Selection of curve BL44AVR
(Barrier Type parameter under the QUICK START menu).
Curve BL44 SR
Change in the type of barrier: Selection of curve BL44SR
(Barrier Type parameter under the QUICK START menu).
Curve BL46 AVR
Change in the type of barrier: Selection of curve BL46AVR
(Barrier Type parameter under the QUICK START menu).
Curve BL46 SR
Change in the type of barrier: Selection of curve BL46SR
(Barrier Type parameter under the QUICK START menu).
Curve RSB 70&71
Change in the type of equipment: Selection of curve RSB
70&71 (Barrier Type parameter under the QUICK START
menu).
To Next Page
Loading...
Need help?
General