Autonics LP-S044 - Page 52

6 System Screen
52 © Copyright Reserved Autonics Co., Ltd.
(1) In case of using only CH1 configured in GP Editor
Item
Operation with touching
①, ② Communication
configuration by channel
Moves communication configuration setting window for
selected connected device.
You can designate baudrate, data bit, parity, stop bit, and flow
control for each channel.
③ Displays CH1 protocol
Rotates in order as downloaded protocol → EDITOR →
PRINTER → BARCODE → UNIVERSAL → DEFAULT protocol
④ Displays CH2 protocol
(as EDITOR for default)
Rotates in order as EDITOR → PRINTER → BARCODE→
MONITOR (
If CH1 is SLAVE, MONITOR does not appear.)
⑤ Displays CH1 connect
port
(Designates automatically
as non-using port in ④)
LP-S044-S1D0: RS422 A PORT↔RS 232C B PORT
LP-S044-S1D1: RS232C A PORT↔RS232C B PORT
⑥ Displays CH2 connect
port
(Designates automatically
as non-using port in ②)
LP-S044-S1D0: RS422 A PORT↔RS 232C B PORT
LP-S044-S1D1: RS232C A PORT↔RS232C B PORT