6 System Screen
© Copyright Reserved Autonics Co., Ltd. 53
(2) In case of using only CH2 configured in GP Editor
Item Operation with touching
①, ② Communication
configuration by each
channel
Moves communication configuration setting window for selected
connected device.
You can designate baudrate, data bit, parity, stop bit, and flow
control for each channel.
If CH1 is as NoUse, it is not able to communication
configuration.
③ Displays CH1 protocol
Rotates in order NoUse → EDITOR → PRINTER →
BARCODE → UNIVERSAL → DEFAULT protocl
④ Displays CH2 protocol.
(as downloaded protocol
for default)
Rotates in order as downloaded protocol → EDITOR →
PRINTER → BARCODE
⑤ Displays CH1 connect
port (Designates
automatically as non-using
port in ④)
LP-S044-S1D0: RS422 PORT ↔ RS232C PORT
LP-S044-S1D1: RS232C A PORT ↔ RS232C B PORT
⑥ Displays CH2 connect
port (Designates
automatically as non-using
port in ②)
LP-S044-S1D0: RS422 PORT ↔ RS232C PORT
LP-S044-S1D1 RS232C A PORT ↔ RS232C B PORT
To Next Page