Autonics TM Series User Manual

6 Parameter Settings and Functions
44 © Copyright Reserved Autonics Co., Ltd.
6.1.6 SV high/low-limit value
You can limit the SV (setting value) range within the temperature range of the sensor or analog
input type (refer to 6.1.1 Input type and temperature range) in order to prevent the system from
controlling with improper SV.
Setting group Parameter Setting range
Factory
default
Unit
Initial Setting
SV High-limit
Refer to the below.
1350
℃/℉
SV Low-limit
-200
 SV low-limit value: Min. value of input sensor range to SV high-limit - 1 digit
 SV high-limit value: SV low-limit + 1 digit to max. value of input sensor range
 Attempts to set the limits outside the min/max input range, or analog's high/low-limits, are
not accepted. Instead, the previous settings are retained.
 SV (setting value) can only be set within the SV low-limit and SV high-limit.
 SV low-limit cannot exceed SV high-limit.
 Changing the input sensors automatically changes the SV high/low-limit settings to max/min
values of the changed input sensor input. The user is required to reset related settings.

Autonics TM Series Specifications

General

Brand	Autonics
Model	TM Series
Category	Temperature Controller
Language	English