Autonics TM Series User Manual

5 Preparation and Startup
38 © Copyright Reserved Autonics Co., Ltd.
5.3 Temperature control examples
5.3.1 Single module
(1) TM4-N2RB model (relay output)
※1. Using SCM-US enables only setting parameter. To monitor and control temperature
requires the additional 24VDC power supply.
Do not connect SCM-US and RS485 communications cables at the bottom at the same time.

Autonics TM Series Specifications

General

Brand	Autonics
Model	TM Series
Category	Temperature Controller
Language	English