6 Parameter Settings and Functions
© Copyright Reserved Autonics Co., Ltd. 73
6.4.11 Alarm output OFF
Available only if alarm output option is set to alarm latch or alarm latch and standby sequence1,
alarm latch and standby sequence2. It can be set to turn off alarm output when alarm output is
on, alarm output conditions have been removed, or an alarm output off signal that is greater than
the minimal signal band is received. (However, alarm output off is unavailable when alarm
conditions remain in effect.)
You can assign the digital input terminals (DI-1, DI-2) for the alarm output off feature.
For more information about digital terminal (DI) setting, please refer to '6.9.1 Digital input
terminal ’.
After deactivating the alarm output, it will function normally for the next alarm output
occurrence.
To Next Page
Loading...
Need help?
General
