3. ENTER to Clear will be dis-
played on the screen. Press
ENTER
to clear all the codes in the vehi-
cle’s computer. (Pressing
DATA
again will take the unit out of Data
mode and display the opening
screen.)
4. After the codes have been cleared,
Clear Successful will be
displayed. Press
DATA to display
the opening screen.
RESET EMR LAMP-CHRYSLER
(1989-95)
Before You Start
• [Chrysler] The Engine
Maintenance Repair (EMR)
lamp reset feature is only
available on Chrysler trucks,
vans, and 1991 and later
Jeeps.
Resetting the EMR Lamp
1. Make sure the EZ-SCAN scanner cable is correctly connected to
the scanner and to the vehicle, the vehicle engine is OFF, the
vehicle ignition key is ON, then press
POWER.
2. Press DATA to display the Data menu. Use the arrow keys until
4-EMR Reset is highlighted, then press ENTER.
CLEAR THE CODES - ALL OBD-II, GM OBD-I, CHRYSLER OBD-I
Page 23
1-Operational Data
2-Freeze Frame Data
3-Trouble Codes
4-Clear Codes
5-Customize Data
6-EZ-PC
Press the ENTER key
to Clear Codes
Press the Data key
to Exit
Clear
*Successful*
To Next Page
Loading...
