1. Press POWER to display the EZ-
SCAN scanner opening screen.
2. Press DATA to display the Data
menu. Make sure
1-KOEO Codes
is highlighted, then press ENTER.
3. If no faults are detected during the
KOEO test, the vehicle’s computer
will store
code 11 or code 111
System Pass
. If a fault is detect-
ed, the fault and its description will be
displayed on the scanner screen.
The fault code number will be dis-
played in the upper left corner of the
screen.
• A down arrow on the screen
indicates more information. Use
the arrow keys to view the addi-
tional text.
• Use the
tand uarrow keys to
view any other faults.
4. Press DATA to exit Data mode and display the opening screen.
VIEW THE MEMORY (TROUBLE) CODES - FORD
Before You Start
• Your vehicle must be scanned before viewing the data. If
DATA is pressed, and the vehicle has not been scanned,
the scanner will display
Press the Scan key to
Scan New Data
. Refer to “Key ON, Engine OFF
(KOEO) Scan” on page 33.
• Memory Codes are intermittent faults that are detected by
Page 40
111 System Pass
VIEW THE KOEO CODES - FORD (CONT.)
1-KOEO Codes
2-Memory Codes
3-KOER Codes
4-Clear Codes
5-DCL Data
6-EZ-PC
To Next Page
Loading...
