number, then give you your Upgrade Key.
7. Use the arrow keys to enter the new Upgrade Key into your
scanner, then press
ENTER. The scanner will display a System
Activated screen.
8. Press ENTER or CONFIG to display the initial screen.
9. The AutoXray Customer Service Representative will then
arrange the purchase and delivery of a new cable that
corresponds to your upgrade.
Registration Card
Please complete the enclosed Registration Card and return it, or
call 480.804.1673. It is the only way AutoXray can notify you of
future upgrades / updates for your scanner.
Scanner Update - Loading New Software Version
Updating your scanner involves loading the latest version of the
AutoXray software onto your scanner. This process requires the
use of EZ-PC. See the Additional Products / Accessories section in
this manual for additional information about EZ-PC. Do the
following to UPDATE your scanner:
1. Press CONFIG from the initial screen.
2. Use the arrow keys to display
4-Download on the screen, then press ENTER.
3. Press ENTER to prepare the scanner to receive the download.
• When the screen displays a Downloading message, the
scanner is in Slave Mode waiting for the PC to begin com-
munication.
System Information
NOTE: Press CONFIG at any time during the following steps to dis-
Page 86
UPGRADE, UPDATE, SPECIFICATIONS (CONT.)
To Next Page
Loading...