ENHANCED OBD-II OPERATIONAL DATA ITEMS
Activating Enhanced OBD-II
AutoXray features select makes of Enhanced OBD-II upgrades that
will give you up to 50% or more operational data items. To activate
the Enhanced OBD-II upgrades, your scanner will need to be oper-
ating software version 1.42 or higher. You can always update your
software version using PC-Link (part # 41000), then call AutoXray
Customer Service to activate the Enhanced OBD-II upgrades.
There is a charge to activate teh Enhanced OBD-II upgrades.
When you call 1.800.595.9729, a representative will step you
through the upgrade process.
Each vehicle will vary on what specific parameters are available.
The list below is a sample of the type of additional data items that
are available for Enhanced OBD-II. Please check the AutoXray
website for the latest upgrade information at www.autoxray.com
Additional Parameters and Values
Parameters Values Parameters Values
A/C Requested / Not Req. Block Learn Idle Numeric
A/C Clutch Engaged / Not Eng. Brake Depressed Yes / No
A/C Pressure Sensor High / Low Calc Air Flow g/s lbs/min
Actual EGR Duty Percentage Calculated Load Percentage
Air Fuel Ratio Numeric Cam Position Err Percentage
Baro Pressure kPa/Hg/PSI Cam Resync Cnt Count
Battery Voltage Volts Cam Retard Degrees
Block Learn Accel Numeric Canister Purge Requested/Not Req.
Block Learn Cruise Numeric Canister Purge Solen Percentage
Block Learn Decel Numeric Catalyst Freq Bank1 Hz
Page 59
To Next Page
Loading...
