This section contains information about the following subjects:
• Scanner Upgrade - Adding Capability (Phone or Internet)
• Scanner Update - Loading New Software Version
• System Information
• Set the Time Units for Capture Mode
• Technical Description of OBD-I and -II
Scanner Upgrade - Adding Capability (Phone or Internet)
Upgrading the scanner involves enabling features in your scanner.
If you have a GM, FORD, Chrysler, or OBD-II scanner, you can
add any of the other
versions to your scanner for a nominal charge
by simply calling AutoXray. One of our Customer Service
Representatives will step you through the process (see our web
site or contact AutoXray for current prices). Do the following to
UPGRADE your scanner:
1. Press CONFIG from the initial screen.
2. Use the arrow keys to display 3-User Upgrade on the
screen, then press
ENTER.
3. Write down the Serial Number for your scanner software, then
press
ENTER.
4. Use the arrows until the vehicle application you want to add is
displayed, then press
ENTER.
5. Write down the Seed Number that is displayed on the screen.
The Seed Number is used by AutoXray to generate a unique
Upgrade Key for your scanner.
6. Call AutoXray at 480.804.1673 and tell the Customer Service
Representative the vehicle application you want to add.
AutoXray will ask for your software serial number and seed
Page 85
UPGRADE, UPDATE, SPECIFICATIONS
To Next Page
Loading...