lowed by its status.
• Each reading will give the
Test Number, the Component
Number, Pass or Fail status,
whether it is a "Hi" value or
"Low" value test, the value
reported by the on-board
computer, and the limit for
that value.
• A down arrow on the screen
indicates other test results. Use the
arrow keys to view these other test results.
NOTE: OBD-II equipped vehicles, are required to report the
results of diagnostic tests for all non-continuously
monitored emissions related components, for instance the
catalytic converter or the EGR valve. These tests vary
among manufacturers and the numbers are assigned
arbitrarily by them and should be listed in the service
manual for the vehicle.
4. Press MON to exit the Readiness Test and display the opening
screen.
Page 32
TEST RESULTS - OBD-II (CONT.)
Test ID $01 Pass
Component ID $11
Pass Low
0400 >=0200
description not
specified
To Next Page
Loading...
