System Status
Operator's Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME-OPERATE/FGB Rev. B, 2009-10-28,
Autronica Fire and Security AS
Page 45
To enter the System Status menu, press the Enter button
To select Alarms, press the Enter button
The total number of detection zones (in this example, 2) in alarm state
is shown in the upper right corner of the display.
Use the arrow down button to scroll down and select a detection
zone.
To view detailed information for a point, press
Use the arrow down button to scroll down and view all information.
To return to Operation Mode, press and hold down the Enter button
for a few seconds.
To Next Page
Loading...
