Autronica Autroprime User Manual

Disabling
Operator's Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME-OPERATE/FGB Rev. B, 2009-10-28,
Autronica Fire and Security AS
Page 46
12. Disabling
12.1 Introduction
From the Disable menu you can disable the following:
 Detection Zone
 Alarm Zone
 Point (detectors, manual call points)
 Fire Alarm Device (FAD)
 Loop Outputs
 Local Outputs
 Loop Inputs
 Local Inputs
 Routing Equipment (FARE/FWRE)
 Loop IO Carriers
When disabling components, a disable time span is given. The disable
time span can be changed for already disabled components by
entering the disable menu.
For information on Disablement Sources, refer to chapter 3.10.
12.2 Disable Menu
NOTE:
Access Level 2
(access by key).
Disable
Detection Zones
Alarm Zones
Points
Fire Alarm Devices
Loop Outputs
Local Outputs
Loop Inputs
Local Inputs
Routing Equipment
Loop IO Carriers
Disable
Time Span

Autronica Autroprime Specifications

General

Brand	Autronica
Model	Autroprime
Category	Fire Alarms
Language	English