Autronica Autroprime - 16. Service Commands; 16.1 Introduction; 16.2 Service Menu

Service Commands
Operator's Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME-OPERATE/FGB Rev. B, 2009-10-28,
Autronica Fire and Security AS
Page 68
16. Service Commands
16.1 Introduction
From the operator panel you can perform service commands. To use
the Service Commands, access level 3 is required.
Access Level Access Remedy Description
3 Password restricted Accessible by persons trained and authorized to do
reconfiguration of site specific data and maintenance
according to the manufacturer’s published instruction.
4 Mechanical tool Accessible by persons doing repair work and changing
firmware.
16.2 Service Menu
The Service Menu includes a great number of submenus, allowing
you to do the entire configuration and service of the Autroprime
Interactive Fire Detection System.
This handbook deals with the testing of:
 Detection Zones
 Alarm Zones
 Fire Alarm Devices
 Loop Outputs
 Local Outputs
For information on the configuration of the Autroprime Interactive Fire
Detection System, refer to the Configuration Handbook.