36
400 SeriesOperating instructions
Stopping the engine (Safe stopping procedure)
1. Lower the boom completely down. Place the attachment rmly on the ground, engage the parking brake, stop the
attachment (move auxiliary hydraulics control lever to neutral position, see page 25), set engine revs to idle.
2. Stop the engine by turning the ignition key to the OFF position (to the left)
3. Release the auxiliary hydraulics pressure (see page 41).
4. Take off the ignition switch and turn the power off with the battery disconnect switch. Prevent any unauthorized use of the loader.
Stop the engine as soon as possible, if you notice any of the following symptoms. Find out the
cause before restarting.
• The oil pressure warning light turns on during use of the loader.
• A sudden and unusual noise is heard.
• There is a sudden increase in engine vibration.
• The color of the exhaust fumes suddenly darkens or turns white.
NOTICE
To Next Page
Loading...
