Avanzini Drago PZERO - 4.1. INTENDED USE (CORRECT)

CHAPTER 4
Instructions, use and maintenance manual
Drago PZero
Page 25
4. DESCRIPTION OF THE MACHINE
In order to assure the maximum operating reliability, AVANZINI BRUCIATORI s.r.l. has carefully chosen the
materials and components used in constructing the machinery, having it undergo a regular test inspection
before delivery. The materials used are also suitable for contact with food products. Its proper performance over
time depends on correct use and proper preventive maintenance according to the instructions provided in this
documentation and in the documentation supplied together with the machine.
All the constructive elements and the connection and command devices have been designed and manufactured
with a degree of safety capable of withstanding abnormal stress, or anyway higher than that indicated. We use
the best quality materials and their introduction to the company, storage and use at the workshop are constantly
controlled to guarantee they have no damage, deterioration or malfunctioning.
Despite the design and constructive measures taken, it is of the utmost importance to strictly follow the
manufacturer's indications for the proper use, safety, long life and reliability of the machine.
The maintenance section of the instruction manual indicates the types of maintenance foreseen for the machine
(routine and extraordinary maintenance), as well as the frequency of maintenance and all the information required
to carry it out properly.
4.1. INTENDED USE (CORRECT)
The machine described in this manual called “Burner Drago PZero” was designed and built to heat up ovens for
the purpose of baking bread and pizza.
The machine is intended for:
INTENDED USE UNINTENDED WORK ENVIRONMENT
Heating of ovens for cooking bread and
pizza
Any use other
than heating food ovens
Foodstuff
The machine was designed to:
• satisfy the specic demands mentioned on the sales agreement;
• be used according to instructions and limitations for use set out herein.
The machine is designed and built to work safely if:
• it is used within the limits stated in the contract and herein;
• the usage manual procedures are followed;
• the maximum expected production is not exceeded;
• routine maintenance operations are performed as indicated;
• special maintenance is performed promptly, in case of need;
• safety devices are not removed and/or modied.