Avanzini Drago PZERO - 7.5. BURNER GAS CONVERSION

CHAPTER 7
Instructions, use and maintenance manual
Page 60
Drago PZero
7.5. BURNER GAS CONVERSION
CAUTION!
The conversion operation requires the purchase of the special conversion kit, which contains a
nozzle; contact AVANZINI BRUCIATORI s.r.l. to obtain all information on how to purchase the
conversion kit.
7.5.1. NOZZLE COMPOSITION
Below are the main components of the nozzle:
POS. DESCRIPTION
1
Nozzle.
NOTE:the nozzle can be replaced as needed.
2
Brass nozzle holder stud bolt.
NOTE: THE STUD BOLT MUST NOT BE REPLACED.
3 Air closing plate for methane gas operation.
2 2
3
1
1