Avanzini Drago PZERO - 5.7. INSTALLING THE BURNER

CHAPTER 5
Instructions, use and maintenance manual
Page 34
Drago PZero
5.7. INSTALLING THE BURNER
Once the hole has been created in the cooking base, you can proceed to install the burner in the oven.
For the burner installation procedure, carry out the operations described below:
STEP ACTION PICTURE
1 Fix the BURNER to the oven in its base using the appropriate bracket.
2 Fix the VALVE UNIT in the designated area.
3 Fix the ame TRIGGERING BUTTON in the designated area.