CHAPTER 5
Instructions, use and maintenance manual
Drago PZero
Page 31
5.3.2. TABLE OF UNITS AND OF WEIGHTS
The following table contains weight information on handling the various units constituting the machine.
UNIT WEIGHT
MACHINE 2 Kg
PACKAGING 4 Kg
Machine transport procedures are described on the following pages.
IMPORTANT!
Check overall mass: if the machine is paired or packaged with other units, you must refer to the
transport documents. If these are not available, contact the Manufacturer.
5.4. ARRANGEMENTS TO BE MADE BY THE CUSTOMER
With the due exceptions made in the contract, the machine Customer user must provide:
• auxiliary utilities suited to system requirements (such as gas network, etc.). The requested features are
contained in the contract of sale.
• trade tools and consumables required for assembly and installation.
The above data is described in the relative paragraphs.
AVANZINI
ATORI
CAUTION!
All external power supply connections to the machine must be made during installation by
AVANZINI BRUCIATORI s.r.l. personnel.
5.5. INSTALLATION ENVIRONMENT
The installation environment is crucial for proper burner operation, since it has to guarantee proper air contribution
to the burner.
The burner can be installed in one of the following ways:
• oven installed indoors;
• oven installed outdoors.
CAUTION!
The conguration of the installation environment is a crucial parameter in order to ensure proper
burner operation.
To Next Page
Loading...
