Avanzini Drago PZERO - Replacement Switch-On Battery

CHAPTER 7
Instructions, use and maintenance manual
Page 64
Drago PZero
7.5.4. REPLACEMENT SWITCH-ON BATTERY
For the ignition battery replacement procedure, carry out the operations described below:
STEP ACTION PICTURE
1
Unscrew and remove the power button
“A”.
A
AB
2
Remove the old battery and insert a
new battery in the compartment “B”,
complying with the polarity.
3 Tighten the button “A”.
4
Dispose of the replaced battery
correctly.
NOTE!
For an AA 1.5 V battery as the new one.