Transferring a call by pressing a key
About this task
Use this procedure to transfer the first call with the second call when you have two ongoing calls.
Procedure
1. Press More.
2. Select Transfer.
The Transfer option is visible only if it is defined in the WinPDM.
3. Press Select.
This connects the first caller with the new caller. Your call is automatically disconnected.
Transferring a call by dialing a number
About this task
You this procedure to transfer an ongoing call to a new call.
Procedure
1. Press More.
2. Select Transfer to new call.
Transfer to new call is visible only when New call and Transfer are defined in the
WinPDM or Device Manager.
3. Press Select.
4. Enter the number of the person where the ongoing call is to be transferred or press the
Call Contact list ( ) icon to access the phone book.
5. Press the On-hook and On/Off ( ) key to the transfer the call.
Starting a conference call
About this task
Use this procedure to initiate a conference call between several participants simultaneously.
Before you begin
A new call is started during the conversation.
Procedure
1. Press More.
2. Select Conference call.
The Conference call option is visible only if defined in WinPDM.
3. Press Select.
Managing Mid-call operations
November 2021 Using Avaya Wireless Handset 3730 with Communication Manager and IP Office 39
Comments on this document? infodev@avaya.com
To Next Page
Loading...
