Note:
You can use Answer call waiting function in two different ways depending on the system
setup and configuration.
Procedure
During a call, you receive a short tone. To answer the second call, do the following:
1. Press More.
2. Select Answer call waiting.
3. Press Select.
You connect to the new call and the first call is put on hold. When the line is free, the call
on hold is automatically dialled again. This is a system dependent feature.
During a call, you receive a beep and a text display. To answer the second call, do the
following:
4. Press Accept.
The system displays the text Switch briefly and transfers to the second call. The first call
is put on hold.
5. To end the call with the second caller, press More > End call.
You disconnect with the second call and connect with the first call.
6. (Optional) Press Decline to reject a second call.
The second caller hears a busy tone, and the call is logged as a missed call in the
handset.
Enabling DTMF
About this task
Some systems or PBXs require that the handset sends Dual Tone Multi Frequency (DTMF) when
pressing the keys. Use this procedure to enable the DTMF.
Before you begin
You must be on a call.
Procedure
Do the following:
• Press More > DTMF > Select.
DECT Info
DECT info is an advanced function intended for an administrator using the handset to measure the
RF link and system parameters as part of a troubleshooting or site survey procedure.
This option is only visible if the Admin menu is activated.
Managing Mid-call operations
November 2021 Using Avaya Wireless Handset 3730 with Communication Manager and IP Office 41
Comments on this document? infodev@avaya.com
To Next Page
Loading...
