Administering deskphone options
124 Administering Avaya 9601/9608/9608G/9611G/9621G/9641G IP Deskphones SIP
Comments? infodev@avaya.com
VLAN_IN_USE,
L2QSIG,
DSCPSIG
TIA LLDP MED
Network Policy
(Voice Signaling)
VLAN_IN_USE - set to the VLAN ID in the TLV.
If the Layer 2 Priority value in the TLV is not zero,
and if the Application Type is 2 (Voice Signaling),
L2QSIG is set to the Layer 2 Priority value in the
TLV.
If the DSCP value in the TLV is not zero, and if the
Application Type is 2 (Voice Signaling), DSCPSIG is
set to the DSCP value in the TLV.
This TLV is ignored if:
● the value of USE_DHCP is “0” and the value
of IPADD is not “0.0.0.0”, or
● the Application Type is not 1 (Voice) or 2
(Voice Signaling), or
● the Unknown Policy Flag (U) is set to 1.
SIP_CONTROLL
ER_LIST
Proprietary Call
Server TLV
SIP_CONTROLLER_LIST will be set to the IP
Address(es) in this TLV value.
TLSSRVR and
HTTPSRVR
Proprietary File
Server TLV
TLSSRVR and HTTPSRVR will be set to the IP
Address(es) in this TLV value.
L2Q Proprietary 802.1
Q Framing
If TLV = 1, L2Q set to "1" (On). If TLV = 2, L2Q set
to "2" (Off). If TLV = 3, L2Q set to "0" (Auto). A
check is made as to whether a reset is necessary to
obtain a new IP address due to a change in the
values of the parameters L2Q or L2QVLAN.
This TLV is ignored if:
● the value of USE_DHCP is “0” and the value
of IPADD is not “0.0.0.0”, or
● the current L2QVLAN value was set by an
IEEE 802.1 VLAN Name, or
● the current L2QVLAN value was set by a TIA
LLDP MED Network Policy (Voice) TLV.
POE_CONS_
SUPPORT
Proprietary - PoE
Conservation Level
Request TLV
If the value of POE_CONS_SUPPORT is “1”,
POE_CONS_MODE is set to the level requested in
the TLV.
System
Parameter Name
TLV
Name
Impact
To Next Page
Loading...
