Icon Description
Missed call on your phone.
Incoming call; indicates you have answered this call.
Outgoing call; indicates you have made this call.
EC500 is activated.
Incoming call is alerting.
Call is active.
Call is on hold.
Conference is active.
Conference is on hold.
Use the Right or Left navigation arrow for additional pages/screens/options.
Scroll left for other options.
Scroll right for other options.
Scroll up or down when there is more information than can display in the
application area.
The call in progress is muted.
Pressing - on the Volume button continuously causes the ringer volume to
turn off. To reinstate volume, press + on the Volume button.
Icon indicating the deskphone is not connected to its network and is
operating in "failover" mode. Some features might not be available or work
correctly. See Limited access during failover on page 88 for information.
If this icon displays in the appearance line, the icon indicates that the phone
has encountered a failure and has preserved the media session until the near
user hangs up.
You have designated this contact or feature as a "favorite." See Setting up
favorites on page 25 for more information.
Indicates that the Send All Calls feature is on.
Indicates that the call is using a wideband codec for good quality voice call.
Indicates a low network performance or presence of local network issues that
might result in lower call quality.
Indicates that the user enabled the LNCC feature. The LNCC feature
changes the Multiple Call Appearance deskphone to a Single Call
Appearance deskphone.
The following table lists the icons used in the 9611G IP deskphone.
Introduction to 9608/9608G and 9611G SIP deskphones
October 2015 Using Avaya 9608/9608G/9611G IP Deskphones SIP 14
Comments on this document? infodev@avaya.com
To Next Page
Loading...
