Searching for a contact
About this task
Use this task to search for a contact that already exist in your contacts list.
You can jump to a certain group of letters in your contacts list by pressing the associated dial pad
button. For example, if you press 3, the deskphone displays entries starting with D, E, or F
depending on the names of contacts that you might have in the contacts list that start with any of
these letters. With each successive dialpad key press, the deskphone displays the matching entries.
Procedure
1. Press CONTACTS.
2. Use the dialpad to type the name that you want to search.
If you set up your contacts in the Last Name and First Name format, type the letters of the
last name. If you have set up your contacts using a different format, type the most likely
letters that matches the contact that you want to find.
3. When the deskphone displays the required match, you can perform any of the following
actions:
• To call the contact, press Call.
• To edit the contact information, press More > Edit.
Next steps
If your administrator has set up a corporate contact list or database, you can extend a search. For
information, see
Extended searching on page 59.
Extended searching
About this task
If your system administrator has set up a corporate contact list or database and has made the
extended searching feature available, you can make a call to other users in your system by name.
Procedure
1. Press Contacts.
2. Press More > Search.
3. Use the dialpad keys to enter all or part of the first and last name of the person that you want
to call.
4. Press Search to start the search.
Searching for a contact
October 2015 Using Avaya 9608/9608G/9611G IP Deskphones SIP 59
Comments on this document? infodev@avaya.com
To Next Page
Loading...
