5. If the search displays the name and number of the person that you want to call, select the
line on which the name appears, and select an appropriate softkey from the following
sofkeys:
• Call: To dial the number of the selected person.
• Details: To see detailed information about the selected person.
• Cancel: To return to the Search screen.
6. If the search does not locate the person that you are searching, press Cancel, and use this
procedure to perform a different search. For example, if you entered a partial first and last
name, enter the name in its entirety and search again.
Viewing the details for a contact
Procedure
1. Press Contacts.
2. Select the contact that you want to view.
3. Press Details to see the information available for that contact.
Selecting Details is the only way to dial a second or third number for a contact.
4. Press the appropriate softkey to call or edit this contact, delete this contact, or return to the
Contacts screen.
Assigning specific ring tone to a contact
You can configure the ringtone that your deskphone plays when your deskphone receives a call
from a contact in your local phone book. Hence, when you receive an incoming call, you can identify
the caller based on the ringer that your deskphone plays. If you have not specified a ringtone for a
contact, the deskphone plays the default ringtone.
Procedure
1. Press CONTACTS.
2. Select the contact for which you want to assign a ring tone, and press Details.
3. Press Edit.
4. Scroll to Ringer.
5. Press OK.
6. Use the Up and Down navigation keys to choose the ring tone of your choice and press OK.
7. Press Back.
8. Press Save.
Using the contacts feature
October 2015 Using Avaya 9608/9608G/9611G IP Deskphones SIP 60
Comments on this document? infodev@avaya.com
To Next Page
Loading...
