Procedure
1. From the Phone screen, scroll right twice to display the System Numbers menu.
2. Scroll to the line to which you want to assign a label or number.
Some labels are not editable. If you can't scroll to a certain line or hear an error tone when
you press the line button, you cannot edit that label.
3. Press Edit.
4. Use the dialpad to enter the label text or the Autodial number.
5. Press Save.
Setting up automatic call back
About this task
When an extension you call is busy, use Automatic Call Back to receive a return call automatically,
as soon as that extension is free.
Procedure
1. Gain access to the Features screen when you get a busy signal from the extension that you
called.
2. Scroll to Auto Callback.
3. Press OK or press the corresponding line button.
When you hang up the callback call, the feature deactivates automatically.
Making an auto intercom call
About this task
Use the Auto-Intercom feature to call a specific extension or intercom group.
Procedure
1. Before dialing, scroll right from the Phone screen to access the Features screen.
2. If necessary, scroll down to Auto Icom and press OK or just press the corresponding line
button.
Two numbers display with the Auto Icom feature, for example “Auto icom 2 3”. The first
number denotes the intercom group number for the Dial Intercom feature. The next number
denotes the extension your administrator has predefined as your automatic intercom
destination extension.
Setting up automatic call back
October 2015 Using Avaya 9608/9608G/9611G IP Deskphones SIP 73
Comments on this document? infodev@avaya.com
To Next Page
Loading...
