System Numbers menu, scroll to right and select the system number label you want to
personalize.
9. Press Edit.
10. Type a new label without any comma (,).
Press More then Clear to clear all text fields and start again.
11. Press Save or OK.
12. You might revert back to the default button labels by selecting Home > Options &
Settings > Application Settings > Restore Default Button Labels and pressing Select
and then Default.
13. You can revert back to the default button labels by tapping Home > Options & Settings >
Application Settings > Restore Default Button Labels and selecting Default to confirm.
Adjusting the brightness or contrast of the display
About this task
Use this task to adjust the brightness and contrast of deskphone screen or button module as
applicable. Contrast adjustment applies only to a deskphone with a black and white display or a
button module attached to a deskphone with a color display screen. You cannot adjust the contrast
of a deskphone with a colored display.
Procedure
1. Press Home.
2. Press Select to select Options & Settings > Screen & Sound Options.
3. Press Brightness or Contrast.
4. Select Phone or an attached button module as applicable.
5. Use the arrow keys to increase or decrease the brightness or contrast.
6. Press Save.
Setting the Return to Home Screen option
About this task
Use this task if you want your deskphone to display the home screen after 10 minutes of being idle.
The default time is 10 minutes. Your administrator can change the default time to any value between
0 and 30 minutes.
Procedure
1. Press Home.
Avaya Menu
October 2015 Using Avaya 9608/9608G/9611G IP Deskphones SIP 26
Comments on this document? infodev@avaya.com
To Next Page
Loading...
