Chapter 8: Using bridged call appearances
In addition to your own call appearances, your phone might show one or more bridged call
appearances on the display screen. A bridged call appearance is of another user and enables you
to determine if that call appearance is in use, answer calls on that appearance, or join a call in
progress on that call appearance from your deskphone. You can also make outgoing calls on a
bridged call appearance when the bridged call appearance is not in use.
Answering a call on a bridged line
About this task
Answering a call on a bridged line is the same as answering the call on a primary line. If the ringing
line is selected, you can answer by picking up the handset or by pressing Speaker or Headset or
Answer.
Procedure
1. Select the bridged call that you want to answer.
The ringing line is selected automatically. If you are on another call when a call comes in to a
bridged line, you have to select the ringing line.
2. PressAnswer.
Joining a call on a bridged line
About this task
Use this task to join an existing call on a bridged line.
Procedure
1. Select the bridged call in progress that you want to join.
2. Press the Bridge softkey.
October 2015 Using Avaya 9608/9608G/9611G IP Deskphones SIP 54
Comments on this document? infodev@avaya.com
To Next Page
Loading...
