3. Press the number(s) that corresponds to the destination extension.
4. Press Enter or OK to activate the intercom call to that extension, where the call appearance
identifies the incoming call with your name followed by ICOM.
Blocking your extension from displaying during calls
About this task
You can override the system (default) setting to display your extension on outgoing calls. Use the
Calling Party Number Blocking feature to prevent your number from displaying.
Procedure
1. From the Phone screen, scroll right to access the Features screen.
2. Select CPN Block.
To stop calling party number blocking, see
Displaying your extension on outgoing calls on
page 74.
3. Press OK.
4. Enter the extension number you do not want the called party to see.
5. Press Enter or OK to start calling party number blocking.
Displaying your extension on outgoing calls
About this task
If you used the CPN Block feature to block your extension's display on calls you make, you can
change it back using CPN Unblock. CPN (Calling Party Number) Unblock lets parties you call see
your extension.
Procedure
1. From the Phone screen, scroll right to access the Features screen.
2. Select CPN Unblock.
To set up calling party number blocking, see
Blocking your extension from displaying during
calls on page 74.
3. Press OK.
4. Enter your extension number.
5. Press Enter or OK to stop calling party number blocking.
About Features
October 2015 Using Avaya 9608/9608G/9611G IP Deskphones SIP 74
Comments on this document? infodev@avaya.com
To Next Page
Loading...
