Avaya 9621G - Busy Indicator

Making an auto intercom call
About this task
Use the Auto-Intercom feature to call a specific extension or intercom group.
Procedure
1. Before dialing, scroll right from the Phone screen to access the Features menu.
2. If necessary, scroll to Auto Icom and touch that feature.
Two numbers display with the Auto Icom feature, for example “Auto icom 2 3”. The
first number denotes the intercom group number for the Dial Intercom feature. The
next number denotes the extension your administrator has predefined as your
automatic intercom destination extension.
3. Touch the number(s) that corresponds to the destination extension.
4. Touch Enter to activate the intercom call to that extension, where the call
appearance identifies the incoming call with your name followed by ICOM.
Blocking your extension from displaying during calls
About this task
You can override the system (default) setting to display your extension on outgoing calls. Use
the Calling Party Number Blocking feature to prevent your number from displaying.
Procedure
1. From the Phone screen, access the Features menu.
2. Select CPN Block.
To stop calling party number blocking, see Displaying your extension on outgoing
calls on page 94.
3. Touch OK.
4. Enter the extension number you do not want the called party to see.
5. Touch OK to start calling party number blocking.
Making an auto intercom call
Using Avaya 9621G/9641G IP Deskphones SIP November 2013 93