EasyManua.ls Logo

Avaya CMC1 - External Modem Option Settings

Avaya CMC1
370 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Connect Modem to Telephone Network
Issue 10 June 2005 147
External Modem Option Settings
The U.S. Robotics Sportster Model USR 33.6 EXT external modem is the recommended
external modem. A locally obtained, type-approved external modem may be used. Contact your
Avaya Inc. representative for information.
To set the options on the external modem:
1. If a non-U.S Robotics Model 839 modem is installed, refer to the setup instructions provided
with that modem. Refer to Table 29: Modem Fields
on page 148 while setting up the
modem. Go to Step 4 to complete the modem administration.
2. If no modem is installed, skip to step 5. If a U.S Robotics Model 839 modem is installed,
perform the following.
3. Use Table 28
to set the 8 option switches on the U.S. Robotics modem
4. Type change system-parameters maintenance and press Enter. Scroll to page 3 of the
form.
Table 28: U.S. Robotics Model 839 External Modem Dip Switch Settings
Dip
Switch
Setting Description
1 UP
DOWN
Data Terminal Ready normal
Data Terminal Ready override
2 UP
DOWN
Verbal result codes
Numeric result codes
3UP
DOWN
Suppress result codes
Display result codes
4 UP
DOWN
Echo offline commands
No echo, offline commands
5 UP
DOWN
Auto answer on first ring or higher if specified in NVRAM
Auto answer off
6 UP
DOWN
Carrier detect normal
Carrier detect override
7 UP
DOWN
Load NVRAM defaults
Load factory defaults
8UP
DOWN
Dumb mode
Smart mode

Table of Contents

Other manuals for Avaya CMC1

Related product manuals