.Install ISDN converters and adapters
Issue 10 June 2005 341
Converters for multi-carrier cabinets
PRI-to-DASS and PRI-to-DPNSS converters
1. Connect the Communication Manager administration PC to the RS-232 connector on the
front of the PRI converter circuit pack.
Figure 109
shows typical connections from the CCSC-1 PRI-to-DASS converter or the
CCSC-2 PRI-to-DPNSS converters to the coaxial facility.
Figure 109: Typical DASS or DPNSS converter cabling
Figure notes:
1. To TN464GP DS1 circuit pack and either a
CSCC-1 PRI-to-DASS converter or a CSCC-2
PRI-to-DPNSS converter circuit pack
2. Communication Manager administration PC
3. RS-232 cable to front of PRI converter
circuit pack
4. 888B coaxial converter
5. Coaxial connection to
2-Mbps facility
6. Coaxial cable from PRI
converter circuit pack to
coaxial converter
ALARMS
EMERTR
C
A
R
D
I
N
U
S
E
ENTER
/YES
NEXT
/NO
BACK
AUDIX
BOOT/
SHUTDOWN
0011
0 RBP 060696
To Next Page
