Important:
Configuring SIP DECT systems used for MSMN ensure that you use the same SARI on all
of them. For more information, see Configuring DECT Settings on page 99.
Call Server Configuration
MSDN configuration requirements:
1.
Uniform (UDP) or coordinated (CDP) numbering plan must be configured on all
sites.
2. All sites must be connected through trunks; Private Network Identifier (PNI) must
be the same for all systems.
3. SPRE and FFC must be enabled; Remote call forward (FFC RCFA, RCFD, RCFV)
must be configured.
Subscribing DECT handsets and UEXT configuration on the home
site
Y
ou must subscribe your DECT handset for MSMN configuration, using your DAP Manager.
Important:
A
DECT handset for MSMN must be subscribed using Enable for Multi-site option in DAP
Manager. For more information, see
Subscribing a DECT handset on page 104.
As for usual SIP DECT set you must also configure a UEXT block on call server.
Important:
When you configure a UEXT block for an MSMN DECT set, enable Call Forward All Calls
to external DN Allowed feature (CLS CFXA).
Importing and exporting subscriptions
Use the procedures in this section to export subscriptions from the home site and import
subscriptions on remote sites.
Exporting subscriptions in a file
1.
In the navigation menu, click Pack Up & Go.
2. SelectExport (multi-site) from the menu.
3. Move the required subscriptions from the Selection list to the Export list, using the
buttons > (for one selected subscription) or >> (for all subscriptions).
System configuration
114 SIP DECT Fundamentals October 2012
Comments? infodev@avaya.com
To Next Page
Loading...
Need help?
General
