Synchronization: This selects the synchronization view which shows the
synchronization path of the selected DAP. Below you see a screen an example of a tree
view.
Icons in the tree view indicate the following conditions: Arrow up (green) = Shows the
synchronization path from the selected DAP to the Master/Root. Glasses = Indicates that
the DAP is seen by the selected DAP
New Master: Sets the currently selected DAP as cluster master in the tree view.
Best Master: Calculates the best master.
Expand All: Expands the entire tree view.
Collapse All: Collapses the entire tree view.
Location: This menu item allows you to load a location file to make the DAP positions
visible in a map of the site/building. When clicking this button, the system asks you to
open a Location file (file that contains a “map” of the building). File type .xml. This file can
be created by means of the Location Builder tool.
System maintenance
158 SIP DECT Fundamentals October 2012
Comments? infodev@avaya.com
To Next Page
Loading...
