Figure 38: Light conductor for LEDs
Now the 4720 DAP
Printed Wiring Board (PWB) and the G.729 Daughter Board are
separate items.
4. Remove the protection foil from the sticky part on the G.729 Daughter Board.
Figure 39: G.729 Daughter Board with sticky foam
5. Mount the G.729 Daughter Board onto the main PWB. Push the Daughter Board
carefully onto the main board. The white connector should fit well. Ensure the
adhesive portion sticks to the Main Board.
G.729 daughterboard and DAP wall mounting
176 SIP DECT Fundamentals October 2012
Comments? infodev@avaya.com
To Next Page
Loading...
